Dolmen Guitars- Contact Dolmen Guitars
Luminlay Advert Click to go to the Pricing page
Click to go to the contact page

Instruments.....

Guitars | Basses

Guitars

I currently have two guitar models, the Rapier and the Katana. The Rapier is a single cut guitar and the Katana is a double cut. These guitars feature a curved carve on the top for very comfortable playing, even on the Rapier which doesn't have a belly cutout on the back. The specs are listed below, but the options are only limited by your imagination.

Rapier

Rapier Guitar

The Rapier is a single cut guitar with two DiMarzio D'Activator humbuckers. The one pictured has a Tune-O-Matic bridge and stop tailpiece but it is also available with a tremolo bridge. Controls are kept to a minimum with just a volume and 3 way toggle switch but this configuration can be customised to suit your needs.

Rapier Guitar

The body core is walnut with a curly maple top finished with white binding. The neck is a nine piece laminate of maple with walnut stripes and features a special carve at the heel body joint that allows access all the way to the 24th fret. The guitar has a set neck (glued in). The fretboard is Macassar ebony with an Ace of Spades inlay. The pickup rings are made of Macassar ebony to match the fretboard.

Rapier Guitar

The above specifications can be changed to suit your requirements. Please CONTACT me if you would like to discuss having one built to your specifications.

Back to top

Katana

Katana Guitar

The Katana is a standard cut away guitar with a curved carve top and two DiMarzio D'Activator pickups. It features a volume and tone pot with a 3 way toggle switch. The body core is walnut with a black poplar burl top. This particular one features a Tune-O-Matic bridge and stop tailpiece but is also available with a tremolo bridge.

Katana Guitar

The neck is a nine piece laminate of maple with walnut stripes and features a special carve at the heel body joint that allows access all the way to the 24th fret . The fretboard is rosewood with offset dot inlays. The guitar has a set neck (glued in).

Katana Guitar

The above specifications can be changed to suit your requirements. Please CONTACT me if you would like to discuss having one built to your specifications.

Back to top

Bass Guitars

Scimitar Bass V

This particular bass won Bass of the week on Best Bass Gear.com. Click HERE to see the article.

Scimitar V Bass

I currently have one model of bass guitar, the Scimitar bass, but am in the process of designing a second model. The Scimitar bass is available in 4, 5 and 6 string variations. The one featured here has a walnut body witha burr elm top. The bolt on neck is a laminate of walnut with maple stripes, finished off with a snakewood fretboard. The front and back of the headstock is faced off in burr elm.

Scimitar V Bass

The neck pocket extends all the way to the neck pickup giving ample room for the 7 bolts that lock the neck in position. The combination of the 7 bolts and a tight neck joint give this bass the characteristics of a neck through bass with plenty of sustain and a well rounded tone.

Scimitar V Bass

The pickups are Delano as is the preamp, featuring bass, middle and treble controls along with pickup blend pot and volume pot. The hardware is all made by Schaller and compliments the beautiful curves of this gorgeous bass.

Scimitar V Bass

The above specifications can be changed to suit your needs, including pickup brand, preamp brand, wood types etc. The sky is the limit!

 

If you are looking for a one off guitar or bass why not consider Dolmen Guitars. I guarantee 100% satisfaction through out the entire process from your first contact to the finished instrument.

Back to top